899 found, showing page 2 of 23
1-1/4 WHT PLASTIC S-TRAP
Replacement S-trap for bathroom lavatory drains. White. With nuts and washers for assembly. Do it bagged.
View Details
Replacement S-trap for bathroom lavatory drains. White. With nuts and washers for assembly. Do it bagged.
1-1/4 S/J WASHER & NUT
Wing nut slip-joint. 1-1/4" x 1-1/4" with washer. Do it bagged.
View Details
Wing nut slip-joint. 1-1/4" x 1-1/4" with washer. Do it bagged.
1-1/4 WHT PLASTIC P-TRAP
For use in kitchen or lavatory.
View Details
For use in kitchen or lavatory.
1-1/2X16 CTR OUTLT WASTE
1-1/2" x 16". Tailpiece provided to use for either direct or slip-joint connection to sink drain. With wing nuts. Do it carded.
View Details
1-1/2" x 16". Tailpiece provided to use for either direct or slip-joint connection to sink drain. With wing nuts. Do it carded.
1-1/2" END OUTLET WASTE
Fits 1-1/2" tubular connections. Tailpiece provided to use for either direct or slip-joint connection to sink drain. With wing nuts. Do it bagged.
View Details
Fits 1-1/2" tubular connections. Tailpiece provided to use for either direct or slip-joint connection to sink drain. With wing nuts. Do it bagged.
1-1/2 PLAS REPAIR P=TRAP
Slip-joint. Includes 1-1/2" x 1-1/4" reducer washer to connect to 1-1/2" or 1-1/4" wall tube in kitchen or lavatory. Includes nuts. White. Do it bagged.
View Details
Slip-joint. Includes 1-1/2" x 1-1/4" reducer washer to connect to 1-1/2" or 1-1/4" wall tube in kitchen or lavatory. Includes nuts. White. Do it bagged.
1-1/2 S/J X SOLV P-TRAP
Sink trap 1-1/2" x 1-1/2" or 1-1/4" x 1-1/2" with 1-1/2" Schedule 40 solvent weld elbow for kitchen or bathroom installation. Do it bagged.
View Details
Sink trap 1-1/2" x 1-1/2" or 1-1/4" x 1-1/2" with 1-1/2" Schedule 40 solvent weld elbow for kitchen or bathroom installation. Do it bagged.
1-1/2 WHT PLASTIC P-TRAP
For use in kitchen or lavatory. Includes nuts and 1-1/2" x 1-1/4" reducer washer.
View Details
For use in kitchen or lavatory. Includes nuts and 1-1/2" x 1-1/4" reducer washer.
1-1/2 WHT PLASTIC J-BEND
For P-trap or S-trap. Supplied with poly-washers and nuts. White. Can be used with existing brass system. Do it bagged.
View Details
For P-trap or S-trap. Supplied with poly-washers and nuts. White. Can be used with existing brass system. Do it bagged.
1-1/2X8 BRANCH TAILPIECE
1-1/2" x 8" branch (7/8" O.D.). Universal slip-joint or direct connect. For use with rubber hose and clamp. Do it carded.
View Details
1-1/2" x 8" branch (7/8" O.D.). Universal slip-joint or direct connect. For use with rubber hose and clamp. Do it carded.
1-1/2 WHT PLASTIC S-TRAP
Replacement S-trap for bathroom lavatory drains. White. With nuts and washers for assembly. Do it bagged.
View Details
Replacement S-trap for bathroom lavatory drains. White. With nuts and washers for assembly. Do it bagged.
1-1/2 WHT PLASTIC J-BEND
Sink trap J-bend 1-1/2" x 1-1/2" or 1-1/2" x 1-1/4" with captive nut. Do it bagged.
View Details
Sink trap J-bend 1-1/2" x 1-1/2" or 1-1/2" x 1-1/4" with captive nut. Do it bagged.
1-1/2" CENTER OUTLET TEE
1-1/2" center outlet tee and tailpiece with sanitary baffle. Slip-joint. Do it hang tagged.
View Details
1-1/2" center outlet tee and tailpiece with sanitary baffle. Slip-joint. Do it hang tagged.
1-1/2" END OUTLET TEE
1-1/2". With sanitary baffle tee for double bowl sinks. Universal slip-joint or direct connection. Do it bagged.
View Details
1-1/2". With sanitary baffle tee for double bowl sinks. Universal slip-joint or direct connection. Do it bagged.
1-1/2X15 SJ/DC WASTE ARM
Waste arm 1-1/2" x 15" slip-joint or direct connect plastic. Do it bagged.
View Details
Waste arm 1-1/2" x 15" slip-joint or direct connect plastic. Do it bagged.
1-1/4" FLEX LAV POPUP
Will work with any plastic, chrome, or brass system. 1-1/4" and will extend from 5-1/4" to 8-3/4". Chrome-plated.
View Details
Will work with any plastic, chrome, or brass system. 1-1/4" and will extend from 5-1/4" to 8-3/4". Chrome-plated.
1-1/2&1-1/4 FLEX J-BEND
Will work with any existing system. Replaces 1-1/4" and 1-1/2" J-bends and adapter. Will fit kitchen sink drains with cast elbow. Do it bagged.
View Details
Will work with any existing system. Replaces 1-1/4" and 1-1/2" J-bends and adapter. Will fit kitchen sink drains with cast elbow. Do it bagged.
1-1/2&1-1/4 FLEX J-BEND
Will work with any existing system. Replaces 1-1/4" and 1-1/2" J-bends. For kitchen and bathroom installations. Extends from 6" to 9-1/2". Do it bagged.
View Details
Will work with any existing system. Replaces 1-1/4" and 1-1/2" J-bends. For kitchen and bathroom installations. Extends from 6" to 9-1/2". Do it bagged.
1/2 BARB X 3/8 MIP ELBOW
1/2 BARB X 3/8 MIP ELBOW
View Details
1/2 BARB X 3/8 MIP ELBOW
32OZ FLOWGUARD GOLD CPVC
32OZ FLOWGUARD GOLD CPVC
View Details
32OZ FLOWGUARD GOLD CPVC
2" SINK STRAINER
For use with 2" O.D. drain opening with grid outlet. Chrome. 1 per card. Uses 1-1/4" tailpiece (not included).
View Details
For use with 2" O.D. drain opening with grid outlet. Chrome. 1 per card. Uses 1-1/4" tailpiece (not included).
1/2x3 FLANGE NIPPLE
1/2" x 3", for Price Pfister tub and shower valves. Plastic. 1 per card.
View Details
1/2" x 3", for Price Pfister tub and shower valves. Plastic. 1 per card.
6" 90D DWV SANITRY ELBOW
PVC Schedule 40 DWV. (1/4 bend), PVC-DWV (hub x hub).
View Details
PVC Schedule 40 DWV. (1/4 bend), PVC-DWV (hub x hub).
6" 90D DWV HUB WYE
PVC Schedule 40 DWV. PVC-DWV (hub x hub x hub).
View Details
PVC Schedule 40 DWV. PVC-DWV (hub x hub x hub).
6" PVC-DWV COUPLING***********
PVC Schedule 40 DWV. Used for connecting DWV pipe of the same size (hub x hub).
View Details
PVC Schedule 40 DWV. Used for connecting DWV pipe of the same size (hub x hub).
48oz PLATSEPTC TREATMENT
48OZ PLATSEPTC TREATMENT
View Details
48OZ PLATSEPTC TREATMENT
3/4" NYLON INSERT ELBOW
Nylon fitting for polyethylene pipe. Nylon insert elbows are used to change direction in piping.
View Details
Nylon fitting for polyethylene pipe. Nylon insert elbows are used to change direction in piping.
4"X100' FABRIC SOCK
Filters out sand and sediment. No need for special gravel backfill, for residential, commercial, or agricultural. Do not use where water pressure is needed.
View Details
Filters out sand and sediment. No need for special gravel backfill, for residential, commercial, or agricultural. Do not use where water pressure is needed.
QT GRAY PVC CEMENT
Silver label can. Recommended for PVC pipe and fittings up to 6" in diameter. For Schedule 40 and Schedule 80 portable water pressure pipe, gas, conduit, and DWV vent pipe. Covers with a thicker layer than regular PVC. Apply at 40 deg. F. to 90 deg. F. NSF and UPC listed. Exceeds ASTM D-2564.
View Details
Silver label can. Recommended for PVC pipe and fittings up to 6" in diameter. For Schedule 40 and Schedule 80 portable water pressure pipe, gas, conduit, and DWV vent pipe. Covers with a thicker layer than regular PVC. Apply at 40 deg. F. to 90 deg. F. NSF and UPC listed. Exceeds ASTM D-2564.
1/4PINT PVC CEMENT
Silver label can. Recommended for PVC pipe and fittings up to 6" in diameter. For Schedule 40 and Schedule 80 portable water pressure pipe, gas, conduit, and DWV vent pipe. Covers with a thicker layer than regular PVC. Apply at 40 deg. F. to 90 deg. F. NSF and UPC listed. Exceeds ASTM D-2564.
View Details
Silver label can. Recommended for PVC pipe and fittings up to 6" in diameter. For Schedule 40 and Schedule 80 portable water pressure pipe, gas, conduit, and DWV vent pipe. Covers with a thicker layer than regular PVC. Apply at 40 deg. F. to 90 deg. F. NSF and UPC listed. Exceeds ASTM D-2564.
*PB TUB FACE PLATE
Metal bathtub face plate with trip lever for use with bath overflow and drain. Includes screws. Easy-to-use. Carded.
View Details
Metal bathtub face plate with trip lever for use with bath overflow and drain. Includes screws. Easy-to-use. Carded.
2" GALV FLOOR FLANGE
Malleable iron pipe fittings. Galvanized. Import. Mueller logo cast into body of each fitting. 100\% inspected and quality tested. All fittings meet the following specifications: Material: ANSI/ASTM A-197 Dimensions: ANSI/ASME B.15.3, B16.14, B16.39. Threads: ANSI B1.20.1.
View Details
Malleable iron pipe fittings. Galvanized. Import. Mueller logo cast into body of each fitting. 100\% inspected and quality tested. All fittings meet the following specifications: Material: ANSI/ASTM A-197 Dimensions: ANSI/ASME B.15.3, B16.14, B16.39. Threads: ANSI B1.20.1.
1-1/2" GALV FLOOR FLANGE
Malleable iron pipe fittings. Galvanized. Import. Mueller logo cast into body of each fitting. 100\% inspected and quality tested. All fittings meet the following specifications: Material: ANSI/ASTM A-197 Dimensions: ANSI/ASME B.15.3, B16.14, B16.39. Threads: ANSI B1.20.1.
View Details
Malleable iron pipe fittings. Galvanized. Import. Mueller logo cast into body of each fitting. 100\% inspected and quality tested. All fittings meet the following specifications: Material: ANSI/ASTM A-197 Dimensions: ANSI/ASME B.15.3, B16.14, B16.39. Threads: ANSI B1.20.1.
1-1/4" GALV FLOOR FLANGE
Malleable iron pipe fittings. Galvanized. Import. Mueller logo cast into body of each fitting. 100\% inspected and quality tested. All fittings meet the following specifications: Material: ANSI/ASTM A-197 Dimensions: ANSI/ASME B.15.3, B16.14, B16.39. Threads: ANSI B1.20.1.
View Details
Malleable iron pipe fittings. Galvanized. Import. Mueller logo cast into body of each fitting. 100\% inspected and quality tested. All fittings meet the following specifications: Material: ANSI/ASTM A-197 Dimensions: ANSI/ASME B.15.3, B16.14, B16.39. Threads: ANSI B1.20.1.
1" GALV FLANGE
Malleable iron pipe fittings. Galvanized. Import. Mueller logo cast into body of each fitting. 100\% inspected and quality tested. All fittings meet the following specifications: Material: ANSI/ASTM A-197 Dimensions: ANSI/ASME B.15.3, B16.14, B16.39. Threads: ANSI B1.20.1.
View Details
Malleable iron pipe fittings. Galvanized. Import. Mueller logo cast into body of each fitting. 100\% inspected and quality tested. All fittings meet the following specifications: Material: ANSI/ASTM A-197 Dimensions: ANSI/ASME B.15.3, B16.14, B16.39. Threads: ANSI B1.20.1.
3/4" GALV FLANGE
Malleable iron pipe fittings. Galvanized. Import. Mueller logo cast into body of each fitting. 100\% inspected and quality tested. All fittings meet the following specifications: Material: ANSI/ASTM A-197 Dimensions: ANSI/ASME B.15.3, B16.14, B16.39. Threads: ANSI B1.20.1.
View Details
Malleable iron pipe fittings. Galvanized. Import. Mueller logo cast into body of each fitting. 100\% inspected and quality tested. All fittings meet the following specifications: Material: ANSI/ASTM A-197 Dimensions: ANSI/ASME B.15.3, B16.14, B16.39. Threads: ANSI B1.20.1.
2" BRASS SHOWER DRAIN
No-caulk cast brass shower drain with snap in stainless steel strainer. 2 In.
View Details
No-caulk cast brass shower drain with snap in stainless steel strainer. 2 In.
